Shop
Showing all 22 results
-
2-Meter Double- Terminated Cable
$100.00 Add to cart -
5-Meter Double- Terminated Cable
$115.00 Add to cart -
FlexSCADA RS232 Adapter
$80.00 Add to cartFlexSCADA RS232 Adapter
(Includes null modem adapter) to accommodate direct serial connection to many MorningStar Charge Controllers* allowing implementation & communication of the modbus RTU serial protocol spec. *Please consult customer service prior to ordering to ensure compatibility
$80.00 -
MCE-ARS Wind Turbine Stop Switch
$299.00 Add to cartMCE-ARS Wind Turbine Stop Switch
The Mission Critical Energy Automatic Remote Stop-Switch (MCE-ARS) provides a means to remotely shut down a wind turbine based on environmental conditions. When combined with a FlexSCADA Q5 and a wind speed indicator (such as the Anemoment TriSonica™ Mini Wind and Weather Sensor) any wind turbine can be made fully autonomous, providing the user with peace of mind that the system will remain protected unsupervised during the harshest conditions. User selectable to work with 24 VDC or 48 VDC systems, the MCE-ARS builds on the success of the early versions of the SW35x-ARS, while improving on the design, functionality and stability of the device.
The MCE-ARS measures 4.5 inches long, 3.5 inches wide and 1.5 inches tall.
$299.00 -
TriSonica Mini Wind and Weather Sensor
$1,350.00 Add to cartTriSonica Mini Wind and Weather Sensor
The world’s smallest and lightest 3D ultrasonic anemometer. The TriSonica Mini Wind and Weather Sensor optimizes size, weight, and power (SWaP) variables and is both reliable and accurate in a variety of applications where monitoring of atmospheric conditions is required. Compact and maintenance free, their no moving parts design makes them ideal for both portable, temporary deployments, as well as permanent installations.
$1,350.00 -
TSM FlexSCADA Kit
$1,850.00 Add to cartTSM FlexSCADA Kit
When combined with the FlexSCADA Q5, the TriSonica Mini Wind and Weather Sensor FlexSCADA Kit not only provides wind statistics (wind speed, direction, temperature, moisture borne in the wind, dew point, and air density), but also allows users to autonomously monitor and control their micro wind turbines, enabling remote and automatic shutdown of turbines during high wind events.
Kit includes a Trisonica Mini sensor, a FlexSCADA conversion box, a 2 or 5 meter interfacing cable (selected at checkout) and a 22mm carbon fiber mounting tube.
$1,850.00 -
12V & 24V Replacement Fuse Kit
$24.00 Add to cart -
48V Replacement Fuse Kit
$40.00 Add to cart -
Flexs Q5 DC Power Distributor
$30.00 Add to cartFlexs Q5 DC Power Distributor
Converts the Flexs Q5’s 8 relay switches into 8 switched dc power ports which draw power from the 2 pin screw terminal. Allows for simplified installation removing the need for a separate bus bar when all loads can be powered from a common source. Do not purchase the part if you require low side switching or more complicated switching configurations.
$30.00 -
Flexs Q5 High Voltage Reducer
$20.00 Add to cartFlexs Q5 High Voltage Reducer
This inline voltage reducer is designed to all you to measure voltages beyond 60V from the Flexs Q5. It connects inline between your voltage source and the input channel on the Flexs Q5 increasing the maximum voltage range from 60V to 300V. The connectors are rated at up to 300V and the voltage scaling components up to 1.5kv providing protection against large surges and transient events.
$20.00 -
Q5 Series Split Power Distribution Panel
$35.00 Add to cartQ5 Series Split Power Distribution Panel
The Q5 Series Split Power Distribution Panel
Converts the Flexs Q5’s 8 relay switches into 4 dedicated switched DC power ports at 12, 24 or 48V, and allows the other four ports to be dedicated a different voltage output. For example, four at 24V and four at 48V. Both power ports sides draw power from opposing the 2 pin screw terminals.
Allows for simplified installation removing the need for a separate bus bar when all loads can be powered from two common voltage sources.
$35.00 -
Flex Din Rail Mounting Kit
$7.00 Add to cart -
Wind Turbine Remote Control Switch – 24V System
$275.00 Add to cartWind Turbine Remote Control Switch – 24V System
Mission Critical Energy’s remote control switch was designed to enable a Superwind 350 watt (D.C. output) wind turbine to be stopped remotely – while still maintaining the attributes of the manual switch, including a complete disconnect from the charge controller and battery bank. Designed to work directly with the FlexSCADA Q5/Pro Series, the device simply requires one dry contact and a power supply for operation.
$275.00 -
Wind Turbine Remote Control Switch – 48V System
$275.00 Add to cartWind Turbine Remote Control Switch – 48V System
Mission Critical Energy’s remote control switch was designed to enable a Superwind 350 watt (D.C. output) wind turbine to be stopped remotely – while still maintaining the attributes of the manual switch, including a complete disconnect from the charge controller and battery bank. Designed to work directly with the FlexSCADA Q5/Pro Series, the device simply requires one dry contact and a power supply for operation.
$275.00 -
Current Sensor (Bi-directional) Non Invasive Amp Coil Style up to 100A [Flex 4 & 5 OLD Style]
$30.00 Add to cartCurrent Sensor (Bi-directional) Non Invasive Amp Coil Style up to 100A [Flex 4 & 5 OLD Style]
This 100A Bi-Directional, Non Invasive current allows you to safely measure electrical current direction and amperage. Note: If you are replacing an old style (pre-2018 current sensor, this is a 1 to 1 replacement, however we highly recommend the new version; ACC-ACS100DR)
$30.00 -
Irradiance sensor
$385.00 Add to cartIrradiance sensor
(Si sensor) are a cost-effective, but rugged and reliable solution for the measurement of solar irradiance, especially for the monitoring of Photovoltaic (PV) systems. Based on the construction of the sensor element corresponding to a PV module they are ideal as reference for the monitoring of PV systems. Especially the spectral response comparable to PV modules as well as the similar inclination error (incident angle modifier) allow an exact analysis of PV energy yields using Si sensor data. Power supply needed: 12 to 28 VDC. Output 0 to 10 V. Range 0 to 1,500 W/m
$385.00 -
Non Invasive Amp Coil Sensor (Bi-directional Current) rated up to 100A
$45.00 Add to cartNon Invasive Amp Coil Sensor (Bi-directional Current) rated up to 100A
NEW!!! 100A Bi-Directional, Non Invasive current with higher accuracy and is Din Rail mountable – allows you to safely measure electrical current direction and amperage. This Current sensor is more durable and accurate than previous versions, and is Made in Canada.
$45.00 -
Wind speed sensor with impulse output
$225.00 Add to cartWind speed sensor with impulse output
Sensor type: Cup star anemometer Signal:Reed relays, 2.5 Hz/(m/s) Range:0.9 to 40 m/s(60 m/s for short time)Accuracy :0.5 m/s or 5% of reading Ambient temperature:-25 to +60°C (without icing) Cable:3m LiYY, 2 x 0.22 mm2, black, weather and uv-resistant. Includes Mounting Plate.
$225.00 -
Flexs Q5 Pro (For up to 48V systems) (0 – 60V)
$800.00 Add to cartFlexs Q5 Pro (For up to 48V systems) (0 – 60V)
The Flexs Q5 Pro is an industrial grade, low power and standalone device that includes everything you need for internet based monitoring and control combined into one single piece of hardware, simplifying installation, reducing power consumption and increasing reliability. Right out of the box you can monitor or log up to eight separate voltages or sensors and control up to eight fused load relays through the internet from your smartphone or laptop. This version includes (8) 80V, 10A, rated Spark Quenching Fuses.
$800.00 -
Flexs Q5 (For up to 48V systems) (0 – 60V)
$550.00 Add to cartFlexs Q5 (For up to 48V systems) (0 – 60V)
The Flexs Q5 is an industrial grade, low power and standalone device that includes everything you need for internet based monitoring and control combined into one single piece of hardware, simplifying installation, reducing power consumption and increasing reliability. Right out of the box you can monitor or log up to eight separate voltages or sensors and control up to eight fused load relays through the internet from your smartphone or laptop. This version includes (8) 80V, 10A, rated Spark Quenching Fuses.
$550.00 -
Waterproof Digital Temperature Sensor Probe 1 meter
$20.00 Add to cartWaterproof Digital Temperature Sensor Probe 1 meter
The DS18B20 is a ULTRA HIGH resolution LOW POWER digital temperature sensor, these are pre-installed into a rugged and waterproof stainless steel enclosure allowing for a variety of installation scenarios. These sensors each contain unique address allowing up to 32 of them to be directily connected to our Flexs series PLC’s with only 3 wires
$20.00 -
Waterproof Digital Temperature Sensor Probe 3 meter
$25.00 Add to cartWaterproof Digital Temperature Sensor Probe 3 meter
The DS18B20 is a ULTRA HIGH resolution LOW POWER digital temperature sensor, these are pre-installed into a rugged and waterproof stainless steel enclosure allowing for a variety of installation scenarios. These sensors each contain unique address allowing up to 32 of them to be directily connected to our Flexs series PLC’s with only 3 wires
$25.00