Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 12 × 12 × 12 in |
Wind speed sensor with impulse output
$225.00
Sensor type: Cup star anemometer Signal:Reed relays, 2.5 Hz/(m/s) Range:0.9 to 40 m/s(60 m/s for short time)Accuracy :0.5 m/s or 5% of reading Ambient temperature:-25 to +60°C (without icing) Cable:3m LiYY, 2 x 0.22 mm2, black, weather and uv-resistant. Includes Mounting Plate.
Related products
-
Waterproof Digital Temperature Sensor Probe 3 meter
$25.00 Add to cartWaterproof Digital Temperature Sensor Probe 3 meter
The DS18B20 is a ULTRA HIGH resolution LOW POWER digital temperature sensor, these are pre-installed into a rugged and waterproof stainless steel enclosure allowing for a variety of installation scenarios. These sensors each contain unique address allowing up to 32 of them to be directily connected to our Flexs series PLC’s with only 3 wires
$25.00 -
Q5 Series Split Power Distribution Panel
$35.00 Add to cartQ5 Series Split Power Distribution Panel
The Q5 Series Split Power Distribution Panel
Converts the Flexs Q5’s 8 relay switches into 4 dedicated switched DC power ports at 12, 24 or 48V, and allows the other four ports to be dedicated a different voltage output. For example, four at 24V and four at 48V. Both power ports sides draw power from opposing the 2 pin screw terminals.
Allows for simplified installation removing the need for a separate bus bar when all loads can be powered from two common voltage sources.
$35.00 -
Non Invasive Amp Coil Sensor (Bi-directional Current) rated up to 100A
$53.00 Add to cartNon Invasive Amp Coil Sensor (Bi-directional Current) rated up to 100A
NEW!!! 100A Bi-Directional, Non Invasive current with higher accuracy and is Din Rail mountable – allows you to safely measure electrical current direction and amperage. This Current sensor is more durable and accurate than previous versions, and is Made in Canada.
$53.00