The new din-rail mountable High Voltage Reducer (HV10M) enables the FlexSCADA Q5 to measure voltages beyond 60 volts. The redesigned HV10M allows users to monitor more inputs and increases the maximum voltage range from 60V to 300V. HV10M connectors are rated to 300V and the voltage scaling components are rated to 1.5kv, providing protection against large surges and
Utilizing the upgraded HV10M, the FlexSCADA Q5 can now monitor voltages from each of the eight (8) analog inputs. Input lines can be connected directly to the terminal blocks and into the HV10M, eliminating the need to remove the terminal block to connect input wires to the high voltage reducer. The improved HV10M is also physically larger than the original version, both to facilitate din-rail mounting and to allow the unit to accept larger gauge input wire. As voltage reduction occurs within the unit, large gauge wire is not required to connect the HV10M to the analog input of the FlexSCADA Q5.