5 Meter cable with male connector at each end
The new din-rail mountable High Voltage Reducer (HV10M) enables the FlexSCADA Q5 to measure voltages beyond 60 volts. The redesigned HV10M allows users to monitor more inputs and increases the maximum voltage range from 60V to 300V. HV10M connectors are rated to 300V and the voltage scaling components are rated to 1.5kv, providing protection against large surges and
Utilizing the upgraded HV10M, the FlexSCADA Q5 can now monitor voltages from each of the eight (8) analog inputs. Input lines can be connected directly to the terminal blocks and into the HV10M, eliminating the need to remove the terminal block to connect input wires to the high voltage reducer. The improved HV10M is also physically larger than the original version, both to facilitate din-rail mounting and to allow the unit to accept larger gauge input wire. As voltage reduction occurs within the unit, large gauge wire is not required to connect the HV10M to the analog input of the FlexSCADA Q5.
When combined with the FlexSCADA Q5, the TriSonica Mini Wind and Weather Sensor FlexSCADA Kit not only provides wind statistics (wind speed, direction, temperature, moisture borne in the wind, dew point, and air density), but also allows users to autonomously monitor and control their micro wind turbines, enabling remote and automatic shutdown of turbines during high wind events.
Kit includes a Trisonica Mini sensor, a FlexSCADA conversion box, a 2 or 5 meter interfacing cable (selected at checkout) and a 22mm carbon fiber mounting tube.
(Includes null modem adapter) to accommodate direct serial connection to many MorningStar Charge Controllers* allowing implementation & communication of the modbus RTU serial protocol spec. *Please consult customer service prior to ordering to ensure compatibility